Best PRODUCT Factory
Certificated Lighting Lifter
- Certificated Solar light
Lighting Lifter Factory
- Indoor Light Bulk
- Customized Outdoor Light Manufacturer
- Certificated Lighting Lifter
Out of the LED product light radiation safety assessment misunderstanding
Out of the LED product light radiation safety assessment misunderstanding According to the relevant personnel of the National Technical Committee on Standardization of Optical Radiation Safety and Laser Equipment, gas discharge lamps, especially fluorescent lamps, have only entered the lives of ordinary people for more than 30 years. People in rural poverty-stricken areas have used less time and have not adapted to biology. Modern artificial lighting source. In recent years, a large number of photobiology and medical research have shown that modern illumination sources exhibit inconsistency and disharmony with human biological characteristics, posing a new threat to human health. In particular, the rapid development of LED light sources and their wide application in the field of general lighting make high-power, high-brightness and high-color LED lighting products enter thousands of households and some functional lighting places. At present, the mainstream blue light LED is used to excite yellow phosphor to produce white light, which is an indispensable part. However, blue light has the potential to penetrate the human lens to the retina, causing photochemical damage to the retina. Normal human retina has metabolic and self-repairing functions, so low-energy blue light radiation usually does not cause organic damage to the human eye. For high-brightness, narrow-beam sources, focusing the illumination source through the human lens and vitreous to the retina can cause acute photochemical damage to the human retina. Many ophthalmologists have reminded everyone through various ways to the harm of blue light to the retina, especially the damage effect of the macula. More and more consumers are gradually recognizing the possible health risks of light radiation. The blue radiation hazard of LED lighting products has also attracted widespread attention from the public, but there is no optical radiation safety standard for LED products at home and abroad. According to reports, LED products usually have high brightness and narrow beam characteristics. Therefore, when measuring, the incident aperture of the measurement system, the typical field of view, the position of the entrance pupil, and the magnitude transfer of the system will have a greater impact on the final measurement results. Based on the optical performance characteristics of LED products, the measurement methods for LED products proposed by this standard have detailed the factors, measurement steps and processes that affect the uncertainty of measurement results, so as to accurately determine the results. Sexuality and international consistency provide assurance. For ordinary consumers, getting an LED lighting product with a logo of Class 0, Class 1, or Class 2 does not know what this level means, and it does not have any guiding significance for its purchase and use. It is mistaken that only products of class 0 can be used, and products of other grades cannot be used. According to the needs of China's industry, the standard issued this time proposes a method for assessing the safety distance. It can identify the safety distance of the product from the perspective of actual use, guide the user to purchase and safely use the product, and inform the user where to be. This product is used under the conditions to guide the user to effectively avoid the danger of light radiation. "Light Radiation Safety Requirements for LED Products for General Lighting" stipulates the optical radiation safety requirements for LED products for general lighting, establishes the general principles of optical radiation safety assessment and classification of optical radiation hazards for LED products, and gives light radiation safety protection for LED products. The guide for the measures is applicable to the production, testing and use of various types of general lighting LED products with a main emission wavelength of visible light (380nm~780nm). The "Measurement Method for Optical Radiation Safety of LED Products for General Lighting" specifies the optical radiation safety measurement method for LED products for general lighting, including the measurement conditions, requirements and methods. The pre-screening evaluation process of blue light hazard assessment is proposed, which simplifies the evaluation process, clarifies the measurement and evaluation steps, ensures the standardization and consistency of measurement operations, proposes product identification specifications, and provides guidance for consumers to purchase and use LED lighting products. The main emission LED products of various general illumination wavelengths are visible light (380nm~780nm).-----Come join the big family of konsRead More>>
Lighting design requires flexible selection of fixtures
Lighting design requires flexible selection of fixtures The lighting fixture solution should take into account both the active lighting fixtures and the decorative art lighting fixtures, that is to say, the interaction between the action and the literary aesthetics. The distinctive characteristics of the interior space of the voucher construction, the purposeful acceptance of the different lighting effects to hold the region, to overcome the traditional lighting fixture selection point design, KONS has been working hard in this direction. If the flashing light lacks the necessary order of artistic aesthetics, it is only satisfactory for the lighting requirements of the indoor space, and there is no very good balance in the quantity and quality of the lighting fixtures. Location. Therefore, in the lighting fixture solution level, it is necessary to select suitable lighting fixtures, fair lighting fixture schemes, and accept lighting fixtures that are legally stipulated by law, satisfactory plan for lighting intensity to comprehensively organize lighting fixtures. Select the point design.Using the lighting effect to construct the team to distinguish the indoor space, can beat a lot of redundant lighting fixtures, so that the unit's primary and secondary indoor space "dark" out, beat the excessive lighting fixtures to complete the team lighting fixtures, not only can be overhauled The hole lighting fixtures can work hard to stipulate and develop the playability of artistic aesthetics. It can also provide a considerable amount of money for the cost of the community owners and the operating costs of the middle and late stages. Moreover, in addition to removing the extra lighting fixtures, in a higher aspect, it is discouraging "environmental pollution" and discouraging "power and energy extravagance and waste." Therefore, it should be extraordinarily delicate and exaggerated! The lighting fixture scheme is by no means brighter and brighter. The lighting fixture scheme is looking for bright, timely, bright and beautiful. In addition to environmental protection and energy conservation, in addition to the reduction of lighting fixtures, we must also actively use, market and promote new environmental protection and energy-saving high-tech. For example, the large unit accepts LED lighting to organize lighting fixtures and decorative design. It is necessary to set a superb and fair operation management system for the luminaire design. It is able to reach a more robust lighting effect, and is also the first of a more effective way to save energy. Others, in the process of holding the lighting project, people can accept the intelligent lighting system operation management system, develop the active level of building application processing, effectively apply for all the construction of indoor space, reduce the power and energy loss together, and save human resources costs. And then develop the quality and obedience of the matter. In general, the lighting plan is only satisfied with the diligence and aesthetic requirements of the planners, lighting planners, owners and other parties, the landlord and other aspects of the effort and artistic aesthetics regulations, and eliminated the lighting The cost of capital investment and the operating costs in the middle and late stages will allow the lighting solutions to be recognized and become a high-cost lighting solution.Read More>>
What are the LED floodlights that are warmly welcomed by the sales market?
What are the LED floodlights that are warmly welcomed by the sales market?What are the LED floodlights that are warmly welcomed by the sales market?LED technology application is a fashionable application technology application in the lighting effect sales market in recent years. With the intelligent transformation of its lighting effects, its role in the lighting of urban and rural lighting can not be underestimated. At least the LED floodlights are said to be greatly welcomed by the sales market because of the combination of LED technology applications. Then, let's discuss the reasons why LED floodlights are popular.First, the use of today's excellent LED new technology applicationsThe application of LED lighting effect technology is nowadays advanced technology. The application of floodlights to its technical applications is in line with the needs of technological development, and it is naturally welcomed by the sales market. In addition, the LED floodlights have the effect of changing the lighting effect, giving everyone a visual enjoyment. The successful application of LED technology to the use of floodlights can naturally be warmly welcomed by the sales market.Second, the product cost is lowerFor example, the independent innovation of high-tech products, the cost will usually be relatively high, but the combination of LED lighting technology application, not only does not improve the cost of goods, but created an environmentally-friendly and energy-saving LED floodlights, can be said to be technological innovation Model. What's more, good quality and low price are the consumers' choices that all buyers expect. LED floodlights have certain advantages in terms of light source switching or price. Therefore, LED floodlights have been well received by everyone. It is generally warmly welcomed and has become one of the fashionable products in the current sales market.Third, anti-seismic and anti-stress ability can be more prominentThe shock-proof led floodlights ensure the safety of the car in the event of an unidentified impact or under uncontrollable weather conditions. The normal use of the floodlights allows the owner to maintain a clear line of sight, thus finding solutions and obtaining rescue in a timely manner. In combination with the application of LED technology, the design concept originally considered the use of the open-air environment. Therefore, the design and design personnel also selected the design material of the LED flood light to have better compression resistance, so it was sold. The market is warmly welcomed.From the above analysis, it is clear that LED floodlights are popularly welcomed by the sales market, but importantly, in addition to the application of today's advanced LED new technology, it also includes lower cost of goods and the goods themselves. The anti-seismic and anti-stress capabilities can be more prominent. It can also be said that the development trend of LED floodlight sales market is inseparable from the innovation and development of LED technology, and the excellent development trend of its sales market is also inseparable from the application of technology application and independent innovation.Read More>>
Why can LEDs become popular in industrial lighting?
Why can LEDs become popular in industrial lighting?The current LEDs are already popular around the world, ranging from kitchen bathrooms to skyscrapers and city streets.So why is LED rapidly popularized in industrial lighting?What are the actual typical cases of KONS light LEDs used in industrial lighting?Today, industrial production facilities have a wide range of applications, and different lighting standards are required depending on the needs of specific indoor spaces.1. For example, in a warehouse and logistics distribution center. Many indoor spaces must have a variety of light-divided luminaires to illuminate a versatile large-area area evenly, while providing good vertical lighting on the aisles of high-storage shelves.2. For example in a manufacturing plant. Many indoor spaces must be optically controlled to improve visibility and safety, and to minimize maintenance. At the same time, manufacturing plants must also have durable fixtures to withstand more complex and harsh environments.3. For example in food processing and cold storage rooms. Many indoor spaces must meet strict regulatory requirements, and the luminaires must be airtight, moisture resistant, and provide maximum light output.Today, LED luminaires can meet many standards, providing higher quality lighting and higher aesthetics without the drawbacks of traditional high-output luminaires.What are the advantages of KONS light LEDs for industrial production of lighting fixtures?1. Can reduce the cost of electricity and energy. Compared with HID lamps and fluorescent lamps, LEDs consume less energy. Most industrial production facilities have large indoor spaces and high ceilings, while previous technologies required high wattage to meet the high lumen output required. But today, high-efficiency LED solutions can deliver the required light output with less than half the power of traditional lighting.2. Can reduce maintenance costs. LEDs currently offer up to four times longer life than traditional lighting fixtures, and lumen maintenance is improved. This reduces the maintenance costs associated with the replacement of the luminaire and creates a safer, brighter environment.3. Controllability of lighting fixtures. Unlike HID and other technologies, LEDs are inherently compatible with control, enabling greater energy savings through daylight control.What factors must be considered before a factory lighting fixture decides to use an LED?1. The shape and lumen output of the current lighting device must be checked. In most cases, installing LED luminaires that are similar in shape to previous luminaires can reduce installation time and increase return on investment.2. The number of lumens should be considered less. The optical performance of LED luminaires is often improved compared to luminaires that use traditional technology. In some applications, some fixtures can achieve the desired level of light with less lumens than current fixtures.3. Must understand the regulations. When replaced with traditional luminaires, local regulations may require energy savings and increased lighting control. In addition, many locations offer incentives to offset some of the initial costs.Read More>>